Articles

The corn stover should be stored under the conditions of keeping its normal amount of moisture against rain and soaking from the ground, avoiding decay and ensuring protection...

The economic feasibility of corn residues harvesting depends on capital (key element) and operating costs. Capital expenditure is the cost of purchasing equipment. Operating costs...

In addition to the technologies for harvesting corn residues in bales described in the previous article, this biomass can be also: pressed into rolls using a roll baler instead...

There are several technological schemes for harvesting grain corn. Currently, the main method for harvesting commercial corn is combine threshing of ears in the field, shredding...

Сorn residues have quite good fuel properties which are close to those of wood fuel. Due to that, biofuels made from corn residues can be burnt in the equipment intended for wood...

Assessment of the corn residues potential for energy in 2018 based on the approach developed by the Bioenergy Association of Ukraine shows the following results: the...

Residues of grain corn production consist of: stalks which make up about 52.5% of the whole mass of the residues. At that, the stalk makes up 27.3% of the mass of the whole...

Corn is the most high-yield crop, all the parts of which are widely used in different industries for many purposes, in particular: for food production; as feedstock in...